This section is about refilling
the engine with oil.
The first and most important step is
making sure the oil plug is securely in place.
The new oil filter needs to be put
now. (When putting the oil filter on, the O-ring should
be coated with oil)
Find the oil cap (1) and remove it.
(Most vehicles have a cap that is labeled with an
oil can symbol)
Check owner's manual for exact amount
of oil to use.
Next pour in the oil. (use
a funnel to prevent from spilling the oil on the engine head)
Now the oil cap can be replaced.
Check the dipstick (2)to see the level
of the oil.
Start the vehicle and let it run for
a few minutes, this fills the oil filter with oil.
Turn the vehicle off and let the oil
settle. (takes five minutes to settle)
Check the dipstick (2) again to make
sure there is enough oil.
Now that the engine is refilled with
oil, properly dispose of the old oil.
Go back to Group